Faculty Publications

img

Research Publication Details

Department of Mechanical Engineering Journal

Research Papers 2019

  1. Kumar, B., Patil, A.K., Jain, S., Kumar, M. Study of Entropy Generation in Heat Exchanger Tube with Multiple v Cuts in Perforated Twisted Tape Insert, Journal of Heat Transfer 141(8),081801, 2019 (Impact Factor: 1.479)
  2. Kumar, S., Jain, S., Kumar, H. Prediction of jatropha-algae biodiesel blend oil yield with the application of artificial neural networks technique, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 41(11), pp. 1285-1295, 2019 (Impact Factor: 0.894)
  3. Sharma, K.D., Jain, S. Overview of Municipal Solid Waste Generation, Composition, and Management in India, Journal of Environmental Engineering (United States), 145(3),04018143, 2019 (Impact Factor: 1.657)
  4. Chamola, R., Khan, M.F., Raj, A., Verma, M., Jain, S. Response surface methodology based optimization of in situ transesterification of dry algae with methanol, H2SO4 and NaOH, Fuel, 239, pp. 511-520, 2019 (Impact Factor: 5.128)
  5. Kumar, B., Patil, A.K., Jain, S., Kumar, M. Effects of Double V Cuts in Perforated Twisted Tape Insert: An Experimental Study, Heat Transfer Engineering, 2019 (Article in press) (Impact Factor: 1.703)
  6. Effect of V cut in perforated twisted tape insert on heat transfer and fluid flow behavior of tube flow: An experimental study, Kumar, B., Kumar, M., Patil, A.K., Jain, S. Experimental Heat Transfer, 32(6), pp. 524-544, 2019 (Impact Factor: 2.000)
  7. Kumar, S., Jain, S., Kumar, H. Performance evaluation of adaptive neuro-fuzzy inference system and response surface methodology in modeling biodiesel synthesis from jatropha– algae oil, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 40(24), pp. 3000-3008, 2018 (Impact Factor: 0.894)
  8. Goyal, A., Pandey, D., Jain, S., Agarwal, J., Jain, S. Development of Decision Model for Power Generation from Carbonized Food Waste, Waste and Biomass Valorization, 9(10), pp. 1955-1960, 2018 (Impact Factor: 2.358)

Conference Papers 2019

  1. Kumar S, Jain S and Kumar H, Implantation of Adaptive Neuro-Fuzzy Inference System and Artificial neural Network for Biodiesel Production From Jatropha-Algae Oil, International Conference on Artificial Intelligence and Applications (IEEE-COER-ICAIA2019) November, 20, 2019
  2. Agarwal G, Khare MK, Energy Consumption in Machining Process-A Sustainable Manufacturing Approach, International Conference on Artificial Intelligence and Applications (IEEE-COER-ICAIA-2019) November, 20, 2019

Book/ Book Chapters 2019

  1. Verma D, Fortunati E, Jain S, Zhang X, Biomass, Biopolymer- Based Materials, and Bioenergy, Elsevier, 2019.
  2. Jain S and Verma D, The consideration of economics during the processing of biofuels, Biomass, Biopolymer- Based Materials, and Bioenergy , Elsevier, 2019.
  3. Jain S, The current and future perspectives of biofuels, Biomass, Biopolymer- Based Materials, and Bioenergy , Elsevier, 2019.
  4. Jain S, The production of biodiesel using Karanja (Pongamia pinnata) and Jatropha (Jatropha curcas) Oil, Biomass, Biopolymer- Based Materials, and Bioenergy, Elsevier, 2019.

Editorial Activities/ Membership of Professional bodies

  1. Dr Siddharth Jain, Editor, International Journal of Renewable Energy Technology Research, USA
  2. Dr Siddharth Jain, Editor in Chief, The Engineering Journal of Application and Scope, India
  3. Dr Siddharth Jain, Editor in charge of Special Issue, International Journal of SpatioTemporal Data Science (IJSTDS), Inderscience, USA
  4. Dr Mridula, Editor in charge of Special Issue, International Journal of SpatioTemporal Data Science (IJSTDS) , Inderscience, USA
  5. Dr Siddharth Jain, Life member: International Association of Small Hydro, India

Previous Journal Paper

  1. Kumar,S.Jain,“Performance Evaluation of adaptive neuro-fuzzy inference system and response surface methodology in modeling biodiesel synthesis from Jatropha-algae oil”, Energy Resource Part A”, Taylor & Francis,2018.(5 September).
  2. Akbari, A.O. Oyedun, , S. Jain, , A. Kumar, “Options for the conversion of pulp and paper mill by-products in Western Canada, Sustainable Energy Technologies and Assessments”, Vol 26: 2018, 83-92. (Accepted 14 October 2018).
  3. Dutt, P. K Sahoo, “Experimental and numerical study of phwr specific suspended debris”, Nuclear Engineering and Design. Vol 330, 2018, pp-344-355. (15 April, 2018).
  4. Verma, S. Jain, “Effect of natural fibers surface treatment and their reinforcement in thermo- plastic polymer composites: A review, Current Organic Synthesis”, Bentham Science, Vol 14, 2017, pp186-199.
  5. Kumar, S. Jain, H. Kumar, “Process parameter assessment of biodiesel production from a Jatropha-Algae oil blend by response surface methodology and artificial neural network”, Energy Resource Part A, Taylor & Francis, 39(22). 2017, pp2119-2125. (20 Nov, 2017).
  6. Narula, MF. Khan, A. Negi, S. Kalra, A. Thakur, S. Jain. “Low temperature optimization of biodiesel production from algal oil using CaO and CaO/Al2O3 as catalyst by the application of response surface methodology”, Energy, Vol 140. 2017, pp879-884. (December 2017).
  7. Narula, A. Thakur, S. Kalra, A. Uniyar, S. Jain “Process parameter optimization of low temperature transesterification of algae-Jatropha Curcas oil blend”, Energy, Vol 19,2017, pp983-988.(January 2017).
  8. A. Goyal , D. Pandey, S. Jain , M. Tyagi , J. Agarwal ,S. Jain. “Development of Decision Model for Power Generation from Carbonized Food Waste”, Waste and Biomass Valorization, springer, 2017, pp 1-6.(27 April 2017).
  9. Agarwal, M.K. Khare, “Modification of Cost Equation for Optimization of Cutting Parameters in Turning in view of Energy Conservation”, International Journal of Latest Technology in Engineering Management & Applied Sciences, 2017,pp7-10 , ISSN 2278-2540.(March 2017)
  10. Kumar, A. Goyal, A. Singhal, “Manufacturing flexibility and its effect on system performance”, Jordan Journal of Mechanical and Industrial Engineering, Vol 11, Number 2,2017, pp 105-112. ISSN 1995-6665.
  11. Khan, S. Jain, M. Vaezi and A. Kumar. “Development of a decision model for the techno-economic assessment of municipal solid waste utilization pathways”, Waste Management, Vol 48, 2016, pp548-564. (Feb -2016).
  12. Sharma, S. Nainwal, S. Jain and S. Jain “ Emerging biorefinery technologies for Indian forest industry to reduce GHG emissions” Ecotoxicology and Environmental Safety Vol 121, 2017, pp105-109. (November 2015).
  13. Dutt, P. K Sahoo, D. Mukhopadhyay, “Experimental investigation of transient behaviour of IPHWR under heat up condition”, Nuclear Engineering and Design, 2015, pp-278-286. (August 2015).
  14. Sharma, S. Nainwal, A.S. Sharma ,S. Jain and S.Jain, “Cold flow properties improvement of Jatropha curcas biodiesel and waste cooking oil biodiesel using winterization and blending”, Energy, Vol 89, 2015, 702-707. (September).
  15. Jain, S.Jain, IT. Wolf, J. Lee and YW. Tong “A comprehensive review on operating parameters and different pretreatment methodologies for anaerobic digestion of municipal solid waste” Renewable and Sustainable Energy Reviews, Vol 52,2015, 142-154.
  16. Singh ,A. Kumar and S.Jain . “Impact of biofuel production on water demand in Alberta”, Canadian Biosystems Engineering, Vol 56:2015, 8.11-8.22. (26 January 2015).
  17. Kumar R., Gakkhar R.P. “Influence of nozzle opening pressure on combustion performance and emission analysis of waste cooling oil biodiesel fuelled diesel engine”, International Journal of Renewable Energy Technology, Vol 9, 2018, 244-259.
  18. Sharma, R. and Chaturvedi, A. K. (2016). Some major threats towards loss of Biodiversity in Tropical Ecosystem in Disaster: An Overview. Proceedings of Disaster Mitigation and Management Strategies. Excellent Publication House, New Delhi, ISBN No. 978-81-932836-7-7. Pp. 12-25.
  19. Sharma, R. and Chaturvedi, A. K. (2016). A Review assessment on Climate Change and Floods. Proceedings of Disaster Mitigation and Management Strategies. Excellent Publication House, New Delhi, ISBN No. 978-81-932836- 7-7. Pp. 32-44.
  20. Sharma, R. and Chaturvedi, A. K. (2016). A review article on early warming prediction through abnormal behavior of animals. Proceedings of Disaster Mitigation and Management Strategies. Excellent Publication House, New Delhi, ISBN No. 978-81-932836-7-7. Pp.82-89.
  21. Chaturvedi, A. K., and Sharma, R. (2017). Scope, Development and Significance of Biomass Energy in India. A Review.

Previous Book Author

  1. Verma, PC. Gope,S. Jain and Z. Xiaolei , “Green Approaches to Biocomposite Materials Science and Engineering”, IGI Global USA, 2016, ISBN number 9781522504245. (June 2016)

Previous Books Chapters

  1. Verma , PC Gope , S. Jain and Z. Xiaolei , “Green composites and their properties: A brief Introduction”, Green Approaches to Biocomposite Materials Science and Engineering, IGI Global USA,2016, ISBN number 9781522504245.
  2. Jain ,YW Tong, “Biodegradation/ Bioremediation for Soil and Water”, Sustainable Water Management and Technologies, Edited by Daniel H. Chen, Lamar University, Beaumont, Texas, 2016, CRC Press, Taylor & Francis, ISBN number 9781482215106.
  3. Verma, PC. Gope, ID. Singh and S. Jain, “Composites from Bagasse Fibers, Its Characterization and Applications”, Agricultural Biomass Based Potential Materials, Springer Verlag, 2015, ISBN number, 9783319138473. (April 2015).
  4. Jain, X. Zhang, “Techno-economic and life cycle assessment for the production of green composites”, Materials Science and Engineering: Concepts, Methodologies, Tools, and Applications, 1-3, 407-413, IGI Global, ISBN number 9781522517986. (2017).

Previous Papers in conference

  1. Dutt, P. K Sahoo, D. Mukhopadhyay, “Thermal hydraulic analysis of suspended debris formed during SCDA in IPHWR”, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC2017), 28-30 December 2017, BITS-Pilani, Hyderabad Campus.
  2. Vashishth and S. Jain “ Prospects of Biodiesel from Algae in Uttarakhand”, presented at the Workshop on Efficient Energy Generation and Utilization in Uttarakhand, March 10-12, 2016, Roorkee, India.
  3. Dutt, P. K Sahoo, D. Mukhopadhyay, “Numerical simulation of suspended debris during SCDA in IPHWR”, 1st International Conference on Nuclear Power Plants: Structures, Risk and Decommissioning, Jury’s Inn, Croydon, 06 – 08 February 2017, London, United Kingdom.
  4. Akbari , S. Jain , A. Kumar, “Technoeconomic assessment of utilization of byproducts from forest industry for production of fuels and chemicals”, abstract accepted for the 2015 BCN-AI Bio Conference: Bioindustrial Innovations: Unlocking Value and Tackling Climate Change, Nov. 22-25, 2015, Shaw Conference Centre, Edmonton, Canada.
  5. Akbari , S. Jain , A. Kumar, “Techno-economic assessment of biofuel production from different conversion pathways”, presented at the 5th International Conference on Biorefinery – towards Bioenergy, August 10-12, 2015, The University of British Columbia, Vancouver, Canada.
  6. Akbari ,S. Jain , A. Kumar , “Opportunities for integration of forest byproducts with conventional industry”, presented at the CSBE/SCGAB Technical Conference and AGM 2015, Innovation in Water, Energy and Biosystems (iWEB) Positioning the Globe for 2050, July 5-8, 2015, Edmonton, AB.
X